25
Installation
ENG/MASTER 96
26
Installing the Steering remote control
Parts supplied
Loading the battery
Remove the battery cover, and insert a lithium (CR2032, 3V) battery. For details, see
“Hardware Manual”.
• Avoid installing the remote control in such a location where the operation of safety devices such as airbags
is prevented by the remote control. Otherwise, there is a danger of a fatal accident.
• Avoid installing the remote control in such a location where the operation of the steering wheel and the
gearshift lever may be prevented. Otherwise, it may result in a traffic accident.
• Installation of the remote control requires specialized skills and experience. Installation of the remote con-
trol should be entrusted to a dealer from whom you purchased this unit.
• Install the remote control using only the parts supplied with this unit. If other parts are used, the remote con-
trol may be damaged or could dismount itself, which leads to an accident or trouble.
• Install the remote control as required by this manual. Failure to do so may cause an accident.
• Do not install the remote control near the doors where rainwater is likely to be spilled on the unit. Incursion
of water into the unit may cause smoke or fire.
• Fix the remote control securely to the steering wheel with the belt attached to the unit. If the remote control
is loose, it disturbs driving stability, which may result in a traffic accident.
• Do not attach the remote control to the outer circumference of the steering wheel. Otherwise, it disturbs dri-
ving stability, causing a traffic accident. Always attach the remote control to the inner circumference of the
steering wheel as shown.
Belt
(2 pcs.)
HolderLithium battery
(CR2032, 3 V)
Steering remote control
CRD3914A_inst_001_030_Eng 5/11/04 4:40 PM Page 26