Filter
Top Products
Black plate (14,1)
1 Press M.C. todisplay the settingmode.
2 TurnM.C. to selectthe equalizer.
POWERFUL—NATURAL—VOCAL—CUS-
TOM1—CUSTOM2—FLAT—SUPER BASS
The equalizerband and equalizerlevel can be
customized whenCUSTOM1 or CUSTOM2is
selected.
If selectingCUSTOM1 or CUSTOM2,complete
the proceduresoutlined below. If selecting
other options,press M.C. to returnto the pre-
vious display.
! CUSTOM1 canbe set separatelyfor each
source. However,each of thebelow combi-
nations areset to thesame setting auto-
matically.
! USB, iPod, PANDORA (iPhone),and
APP (iPhone)
! BTAUDIO, PANDORA (smartphone),
and APP(smartphone)
! CUSTOM2 isa shared settingused in com-
mon forall sources.
3 Press M.C. todisplay the settingmode.
4 Press M.C. tocycle between thefollowing:
Equalizer band—Equalizerlevel
5 TurnM.C. to selectthe desired setting.
Equalizer band:80HZ—250HZ—800HZ—
2.5KHZ—8KHZ
Equalizer level:+6 to –6
LOUDNESS (loudness)
Loudness compensatesfor deficiencies inthe low-
frequency andhigh-frequency ranges at lowvol-
ume.
1 Press M.C. toselect the desiredsetting.
OFF (off)—LOW(low)—MID (mid)—HI (high)
SUB.W (subwooferon/off setting)
This unitis equipped witha subwoofer output
which canbe turned on oroff.
1 Press M.C. toselect the desiredsetting.
NOR (normalphase)—REV (reverse phase)—
OFF (subwooferoff)
SUB.W CTRL(subwoofer adjustment)
Only frequencieslower than thosein the selected
range areoutputted from thesubwoofer.
1 Press M.C. todisplay the settingmode.
2 Press M.C. tocycle between thefollowing:
Cut-off frequency—Outputlevel—Slope level
Rates thatcan be adjustedwill flash.
3 TurnM.C. to selectthe desired setting.
Cut-off frequency: 50HZ—63HZ—80HZ—
100HZ—125HZ—160HZ—200HZ
Output level:–24 to +6
Slope level:–12— –24
BASS BOOST(bass boost)
1 Press M.C. todisplay the settingmode.
2 TurnM.C. to selecta desired level.
0 to+6 is displayedas the level isincreased or
decreased.
HPF SETTING(high pass filteradjustment)
Use thisfunction when wanting tolisten only to
high-frequency sounds.Only frequencies higher
than thehigh-pass filter (HPF)cutoff are output
from thespeakers.
1 Press M.C. todisplay the settingmode.
2 Press M.C. tocycle between thefollowing:
Cut-off frequency—Slopelevel
3 TurnM.C. to selectthe desired setting.
Cut-off frequency: OFF—50HZ—63HZ—80HZ
—100HZ—125HZ—160HZ—200HZ
Slope level:–12— –24
SLA (sourcelevel adjustment)
This functionprevents the volumefrom changing
too dramaticallywhen the sourceswitches.
! Settings arebased on theFM volume level,
which remainsunchanged.
! The AMvolume level canalso be adjusted with
this function.
! Each of thebelow combinations areset to the
same settingautomatically.
! USB, iPod, PANDORA (iPhone),and APP
(iPhone)
! BTAUDIO, PANDORA (smartphone),and
APP (smartphone)
1 Press M.C. todisplay the settingmode.
2 TurnM.C. to adjustthe source volume.
Adjustment range:+4 to –4
System menu
1 Press M.C. to display the mainmenu.
2 Turn M.C. to change the menu option
and press to select SYSTEM.
3 Turn M.C. to select the system menu
function.
Once selected, the following system menufunc-
tions can be adjusted.
! INFO DISPLAYand BRIGHTNESS arenot
available forDEH-X4600BT.
! BTAUDIO, BTMEM CLEAR,BT VERSION
and APPCONN. SET arenot available for
DEH-X3600S.
CLOCK SET(setting the clock)
1 Press M.C. todisplay the settingmode.
2 Press M.C. toselect the segmentof the clock
display youwish to set.
Hour—Minute
3 TurnM.C. to adjustthe clock.
12H/24H (timenotation)
1 Press M.C. toselect the desiredsetting.
12H (12-hourclock)—24H (24-hour clock)
INFO DISPLAY(sub information)
The typeof text information displayedin the sub
information sectioncan be toggled.
1 Press M.C. todisplay the settingmode.
2 TurnM.C. to selectthe desired setting.
SPEANA—LEVEL METER—SOURCE—CLOCK
—OFF
! The signalbar indicator displays forSPEANA
or LEVELMETER when thesource is set to
RADIO.
AUX (auxiliary input)
Activate thissetting when usingan auxiliary de-
vice connectedto this unit.
1 Press M.C. toturn AUX onor off.
DIMMER (dimmer)
1 Press M.C. toturn the dimmeron or off.
! You can alsochange the dimmersetting by
pressing andholding
/DIMMER.
BRIGHTNESS (brightnessadjustment)
You can usethis setting toadjust the display
brightness.
The rangeof settings availablefor BRIGHTNESS
will vary dependingon whether DIMMER ison or
off. Fordetails, refer to DIMMER(dimmer) on page
14.
1 Press M.C. todisplay the settingmode.
2 TurnM.C. to selectthe desired setting.
DIMMER on:1 to 4
DIMMER off:1 to 5
BTAUDIO (Bluetooth audio activation)
You need toactivate the BTAUDIO sourcein order
to usea Bluetooth audioplayer.
1 Press M.C. toturn the BTAUDIO sourceon or
off.
Using this unit
14
Section
Using this unit
En
02
<QRD3195-A>14