Filter
Top Products
Black plate (73,1)
<CRB2123-A/U>73
4 Press n and then press r or q to
select the center frequency of selected
band.
Each press of r or q selects the frequency
in the following order:
40Hz50Hz63Hz80Hz100Hz125Hz
160Hz200Hz250Hz315Hz400Hz
500Hz630Hz800Hz1kHz1.2kHz
1.6kHz2kHz2.5kHz3.1kHz4kHz
5kHz6.3kHz8kHz10kHz12kHz
5 Press n and then press r or q to
adjust the equalizer level.
Each press of r or q increases or de-
creases the equalizer level. +6 6 is dis-
played as the level is increased or decreased.
6 Press n and then press r or q to
select the desired Q factor.
Each press r or q switches between the
following Q factor:
WID (wide)NAR (narrow)
# You can adjust parameters for each band of
the other speakers in the same way.
7 Press BAND to return to the playback
display.
Note
You can select a center frequency for each band.
You can change the center frequency in 1/3-oc-
tave steps, but you cannot select frequencies that
have intervals shorter than 1 octave among the
center frequencies of the three bands.
Digital Signal Processor
En
73
Section
12
Digital Signal Processor