Filter
Top Products
Multi-CD Player
Scanning CDs and tracks
While you are using T.SCAN (disc repeat), the
beginning of each track on the selected disc
plays for about 10 seconds. When you are using
D.SCAN (multi-CD player repeat), the beginning
of the first track of each disc is played for about
10 seconds.
1 Select the repeat range.
Refer to Repeating play on page 47.
2 Press
F to select SCAN.
Press
F until Scan appears in the display.
• Pressing FUNCTION on the head unit also
performs the same operation.
3 Press E to turn scan play on.
Scan :ON appears in the display. The first 10
seconds of each track of the present disc (or the
first track of each disc) is played.
• Pressing 5 on the head unit also performs
the same operation.
4 When you find the desired track (or disc)
press e to turn scan play off.
Scan :OFF appears in the display. The track (or
disc) will continue to play.
• If the display has automatically returned to
the playback display, select SCAN again by
pressing F (FUNCTION on the head unit).
• Pressing ∞ on the head unit also performs the
same operation.
Note
• After track or disc scanning is finished, nor-
mal playback of the tracks will begin again.
Pausing CD playback
Pause lets you temporarily stop playback of the
CD.
1 Press
F to select PAUSE.
Press
F until Pause appears in the display.
• Pressing FUNCTION on the head unit also
performs the same operation.
2 Press E to turn pause on.
Pause :ON appears in the display. Play of the
current track pauses.
• Pressing 5 on the head unit also performs
the same operation.
3 Press e to turn pause off.
Pause :OFF appears in the display. Play will
resume at the same point that you turned pause
on.
• Pressing ∞ on the head unit also performs the
same operation.
Using ITS playlists
ITS (instant track selection) lets you make a
playlist of favorite tracks from those in the multi-
CD player magazine. After you have added your
favorite tracks to the playlist you can turn on ITS
play and play just those selections.
En
48
07
Section