Filter
Top Products
Audio Adjustments
Using the equalizer
The graphic equalizer lets you adjust the equal-
ization to match car interior acoustic character-
istics as desired.
Recalling equalizer curves
There are seven stored equalizer curves which
you can easily recall at any time. Here is a list of
the equalizer curves:
Display Equalizer curve
SUPER BASS Super bass
POWERFUL Powerful
NATURAL Natural
VOCAL Vocal
CUSTOM1, 2 Custom1, 2
FLAT Flat
• CUSTOM1 and CUSTOM2 are adjusted equal-
izer curves.
• A separate CUSTOM1 curve can be created
for each source.
• If you make adjustments when a curve other
than CUSTOM2 is selected, the equalizer curve
settings are memorized in CUSTOM1.
•A CUSTOM2 curve can be created common to
all sources.
• If you make adjustments when the CUSTOM2
curve is selected, the CUSTOM2 curve is
updated.
• When FLAT is selected no supplement or
correction is made to the sound. This is useful
to check the effect of the equalizer curves by
switching alternatively between
FLAT and a set
equalizer curve.
1 Press
EQ on the head unit to display the
equalizer mode.
2 Press
EQ on the head unit to select the
equalizer.
Press EQ on the head unit repeatedly to switch
between the following equalizer curves.
SUPER BASS—POWERFUL—NATURAL—
VOCAL—CUSTOM1—CUSTOM2—FLAT
Adjusting equalizer curves
You can adjust the currently selected equalizer
curve setting as desired. Adjusted equalizer
curve settings are memorized in CUSTOM1 or
CUSTOM2.
1 Press A to select the equalizer mode .
Press A until EQ Low/EQ Mid/EQ High appears in
the display.
• Pressing AUDIO on the head unit also per-
forms the same operation.
2 Select the equalizer band you want to
adjust with 1 or ¡.
EQ Low (low)—EQ Mid (mid)—EQ High (high)
• Pressing 2 or 3 on the head unit also per-
forms the same operation.
3 Press E or e to adjust the equalizer
curve.
Each press of E or e increases or decreases
the equalizer curve respectively.
• +6 – –6 is displayed as the equalizer curve is
increased or decreased.
• Pressing 5 or ∞ on the head unit also per-
forms the same operation.
Note
• If you make adjustments when a curve other
than CUSTOM2 is selected, CUSTOM1 curve
is updated.
En
56
08
Section