Filter
Top Products
Initial Settings for
DVD player
En
69
Setting digital and analog audio
output (OUTPUT SELECTION)
You can set linear PCM audio output for both
digital and analog output. Set audio output
correctly to match the components you are
using with this unit.
Precaution
• If the setting is incorrect there will be no
sound so be sure to read the manuals of the
connected components.
1 Move the joystick up/down to select
OUTPUT SELECTION
in the second SET UP
MENU
.
OUTPUT SELECTION is indicated in blue.
2 Click the joystick.
Audio output setting menu is displayed.
3 Move the joystick up/down to select the
desired audio output setting.
The currently set audio output setting is indi-
cated the mark “ ”. The audio output setting
selected with the joystick is indicated in blue.
Output setting Setting detail
48kHz Select this setting when using
digital connections. A 48 kHz
signal is output regardless of
the audio sampling frequency.
A 96 kHz signal is converted to
a 48 kHz signal. (Initial setting)
96kHz Select this setting when using
analog connections.
The signal is output with the
same frequency as the audio
sampling frequency. With a 96
kHz signal, you can enjoy
exceptionally high sound qual-
ity.
4 Click the joystick.
The selected audio output setting is set.
Notes
• With discs featuring 96 kHz recording, if you
select the 96kHz setting, audio is not output
from digital output.
• With discs do not feature a CSS (Content
Scrambling System) copy guard signal, a 96
kHz digital signal is output.
• When using this unit with a Pioneer Multi-
channel processor (DEQ-P7050), select 48kHz
setting. If you select the 96kHz setting, no
sound will be output when playing discs fea-
turing 96 kHz recordings.
• Pressing RETURN takes you back to the previ-
ous display.
English
Español
Deutsch
Français
Italiano
Nederlands
09
Section