Filter
Top Products
Audio Adjustments
Introduction of audio
adjustments
1 AUDIO display
Shows the audio adjustments status.
2 SUBWOOFER indicator
Shows when the subwoofer in on.
Press
A to display the audio function names.
Press
A repeatedly to switch between the follow-
ing audio functions:
Fad (balance adjustment)—EQ (equalizer curve
adjustment)—Bass (bass)—Treble (treble)—
Loud (loudness)—Sub-W1 (subwoofer1)/Non Fad
(non fading output on/off)—Sub-W2
(subwoofer2)/Non Fad (non fading output set-
ting)—HPF (high pass filter)—SLA (source level
adjustment)
• When the subwoofer controller setting is only
S.W Control:EXT, you cannot switch the Sub-W1.
(Refer to page 73.)
• You can select the Sub-W2 only when
Subwoofer output is switched on in the Sub-W1.
• When the subwoofer controller setting is only
S.W Control:EXT, you can switch the non fading
output on/off mode. (Refer to page 73.)
• You can select the non fading output setting
mode only when non fading output is switched
on in the non fading output on/off mode.
• Pressing AUDIO on the head unit also per-
forms the same operation.
• When selecting the FM tuner as the source,
you cannot switch to SLA.
• To return to the playback display, press
BAND/ESC.
Important
• If the Multi-channel processor (DEQ-P7050) is
connected to this unit, the audio function will
be changed into the Multi-channel proces-
sor’s audio menu. For details, see the Multi-
channel processor (DEQ-P7050) owner’s
manual.
Notes
• If you do not operate the audio function within
about 30 seconds, the display is automatically
returned to the source display.
• Audio menu functions change depending on
the rear output setting in the initial setting
menu. Refer to Setting the rear output and
subwoofer controller on page 73.
21
En
54
08
Section