Filter
Top Products
Initial Settings for
DVD player
Notes
• If the selected language is not recorded on
the disc, languages specified on the disc are
displayed.
• You can also switch the subtitle language
during playback with SUBTITLE. (See page
26.)
• Even if you use SUBTITLE to switch the subti-
tle language, this does not affect the settings
here.
• Pressing RETURN takes you back to the previ-
ous display.
When you select OTHERS
When you select OTHERS, a language code
input display is shown. Refer to Language code
chart for DVD on page 80, using the number
buttons to input the four digit code of the
desired language, then click the joystick.
Note
• Pressing CLEAR cancels the input numbers.
Setting the audio language
(AUDIO LANG.)
You can set the preferred audio language.
1 Move the joystick up/down to select
AUDIO LANG
.
AUDIO LANG. is indicated in blue.
2 Click the joystick.
An audio language menu is displayed.
3 Move the joystick up/down to select the
desired audio language.
The currently set language is indicated the mark
“ ”. The language selected with the joystick is
indicated in blue.
• To switch to the second audio language
menu, press ¢.
• To return to the first audio language menu,
press 4.
4 Click the joystick.
The audio language is set.
Notes
• If the selected language is not recorded on
the disc, the language specified on the disc is
output.
• You can also switch the audio language dur-
ing playback with AUDIO. (Refer to page 26.)
• Even if you use AUDIO to switch the audio
language, this does not affect the settings
here.
• Pressing RETURN takes you back to the previ-
ous display.
• If you have selected OTHERS, refer to When
you select OTHERS on this page.
En
64
09
Section