Filter
Top Products
Initial Settings
1 Press F to select FM.
Press F repeatedly until FM Step appears in the
display.
• Pressing FUNCTION on the head unit also
performs the same operation.
2 Select the FM tuning step with 1 or ¡.
Pressing 1 or ¡ will switch the FM tuning
step between 50 kHz and 100 kHz. The selected
FM tuning step will appear in the display.
• Pressing 2 or 3 on the head unit also per-
forms the same operation.
Note
• If seek tuning is performed in 50 kHz steps,
stations may be tuned in imprecisely. Tune in
the stations with manual tuning or use seek
tuning again.
Setting the AM tuning step
The AM tuning step can be switched between 9
kHz, the preset step, and 10 kHz. When using
the tuner in North, Central or South America,
reset the tuning step from 9 kHz (531 – 1,602
kHz allowable) to 10 kHz (530 – 1,640 kHz allow-
able).
1 Press
F to select AM.
Press
F repeatedly until AM Step appears in the
display.
• Pressing FUNCTION on the head unit also
performs the same operation.
2 Select the AM tuning step with 1 or ¡.
Pressing 1 or ¡ will switch the AM tuning
step between 9 kHz and 10 kHz. The selected
AM tuning step will appear in the display.
• Pressing 2 or 3 on the head unit also per-
forms the same operation.
Switching the warning tone
If the front panel is not detached from the head
unit within five seconds of turning off the igni-
tion, a warning tone will sound. You can turn off
this warning tone.
1 Press F to select WARN.
Press F repeatedly until Warning appears in the
display.
• Pressing FUNCTION on the head unit also
performs the same operation.
2 Select WARN on or off with E or e.
Pressing E or e will switch Warning between
on and off and that status will be displayed (e.g.,
Warning :ON).
• Pressing 5 or ∞ on the head unit also per-
forms the same operation.
Switching the auxiliary setting
It is possible to use auxiliary equipment with
this unit. Activate the auxiliary setting when
using auxiliary equipment connected to this
unit.
1 Press F to select AUX.
Press F repeatedly until AUX appears in the
display.
• Pressing FUNCTION on the head unit also
performs the same operation.
En
72
10
Section