Filter
Top Products
12
1.2.3 Network Setup
MEDIAGATE T1 can connect to a network. It is possible to obtain the IP address automatically from your DHCP Server
or Router, or manually set a specific IP address. Check your network environments.
ü DHCP On: You can use this option toobtain the IP address automatically from a DHCP Server or Router.
ü DHCP Off: When it is not possible to obtain the IP address automatically, you must use this option. Enter the IP address and Subnet
mask manually.
‘DHCP On’ Setup Procedure
1. Press [SETUP] in the Mode Selection screen. 2. Select the ‘Network’ icon and press [ENTER].
Setup box will be displayed under the icon menu.
3. Select DHCP: On and press [ENTER].
4. Press [SETUP] to save the configurations.
ü When you use ‘DHCP On’, you can see the IP
address in the MENU screen after selecting the
[PC-Network] icon in the Mode Selection screen.