Filter
Top Products
42
1) After connecting MEDIAGATE T1 and plugging in
AC power cable, Windows will install the driver
automatically. Check the driver installation by going
to [Start menu, Settings, Control Panel, (switch to
Classic View on Windows XP), System, Hardware,
Device manager, Universal Serial Bus controllers] You
should see a USB Mass Storage Device.
2) Check ‘My Computer’ or ‘Explorer’, there should be
a new hard drive designated volume. You can copy
any data to this volume.
3) After copying data, remove MEDIAGATE T1 by
using remove icon at task on the lower right
hand corner of your screen. If you do not follow this
procedure, data and MEDIAGATE T1 may be
damaged.
3.2.3 Windows 2000, XP
ü If new volume has not appeared, check HDD format
and HDD file system. Windows 2000 and XP need to
detect MEDIAGATE T1 as aFAT32 file system.
ü If you see ‘Non High-Speed USB HubMessage’:
This message will be displayed on Windows XP when
you plug MEDIAGATE T1 into USB 1.1 spec. Host
adapter.