PoGo Products T1 Car Stereo System User Manual


 
32
2.1.2 Connect Audio Cable
You’ll need to connect the audio cable in order to hear the audio coming from the MEDIAGATE T1. MEDIAGATE T1
supports 3 types of audio output; Stereo, Coaxial, and Optical. Use the audio connection that your TV or Audio set
supports. Normally, your TV will support a stereo audio connection. This package contains a stereo audio cable.
Red
(STEREO-R)
(STEREO-L)
White
Red
(STEREO-R)
(STEREO-L)
White
Connect Stereo-R
Jack of TV.
Connect Stereo-L
Jack of TV.
OPTICAL (¨ )
Connect Optical Jack of
Amplifier or Receiver
Connect coaxial jack of
Amplifier or Receiver.
Stereo:Red&WhiteRCACable(supplied)
Optical(¨ ):OpticalCableforDigital5.1ch.(notsupplied)
Coaxial: CoaxialcableforDigital5.1ch.(notsupplied)
COAXIAL
ü Don’t connect optical and coaxial cable together at the same time.
ü If you cannot hear sound after connecting the Optical or Coaxial Cable, you will have to change audio setup of MEDIAGATE
T1 to Encoded Digital. See “1.2.2 Audio Setup”