Filter
Top Products
34
2.2.2 Connection via DHCP Server or Router
In this section, your TiVo® box and MEDIAGATE T1 will be connected to a DHCP Server or router. It is possible to
obtain the IP address automatically if you are using a DHCP Server or Router.
ü DHCP On: You can use this option toobtain the IP address automatically from a DHCP Server or Router.
ü You may use a standard straight-through Ethernet LAN cable for this setup.
‘DHCP On’ Setup Procedure
1. Turn on MEDIAGATE T1 and press [SETUP] in
Mode Selection screen.
2. Select the ‘Network’ icon and press [ENTER].
Setup box will be displayed under the icon menu.
3. Select DHCP: On and press [ENTER].
4. Press [SETUP] to save the configurations.
ü When you use ‘DHCP On’, you can see the IP
address in the MENU screen after selecting the
[PC-Network] icon in the Mode Selection screen.
Once you see the IP Address, your MEDIAGATE
T1 will be connected to the network.