Filter
Top Products
-
11
In the TV mode of A2 TV broadcasts
When receiving a stereo signal
Each time you press MPX, the mode switches
between STEREO and MONO.
Stereo mode
B/G
STEREO
BBC1
B/G
MONO
PAL PAL
ATV ATV
BBC1
When receiving a bilingual signal
Each time you press MPX, the mode switches
among CH A, CH B and CH AB.
Bilingual mode
B/G
CH A
BBC1
B/G
CH B
PAL PAL
ATV ATV
BBC1
B/G
CH AB
PAL
ATV
BBC1
When receiving a monaural signal
When you press MPX, “MONO” displays.
Monaural mode
B/G
MONO
PAL
ATV
BBC1
NOTE
• “BBC1”, “01” and “PAL” are tentative network name,
channel and colour system.
EPG
What is an EPG?
An “EPG (Electronic Programme Guide)” is a
programme schedule, which is displayed on the TV
screen. The EPG is broadcasted together with DTV.
The TV screen shows the EPG when the viewer
presses EPG on the remote control, provided that
the TV is receiving the digital broadcasting signal.
The EPG enables you to search for a programme, do
timer view the programme schedule in detail.
Basic Operation
H
Display the EPG screen
1 Press EPG.
INFOGUIDE
ATV/DTV
RADIOINF
O
GU
IDE
ATV
/
DTV
R
ADI
O
EPG
33
PROGRAMME GUIDE TIME
HD Monosco
01 Jan 20:01
Manual adjust
10 HD Monosco
Color Bar 576i
11 Color Bar 5...
Monosco 576–1
12 Monosco 576...
Monosco 576–2
13 Monosco 576...
Schedule
INFO
G
Remind
B
ENTER
RETURN
Y
2 Press
a
to select PROGRAMME GUIDE/TIME.
3 Press
c
/
d
to select the desired channel/time
span.
H
Close the EPG screen
4 Press EPG again or RETURN to exit.
NOTE
• For “New Zealand delivery model”, the EPG screen and
operation differ due to the use of MHEG EPG. The EPG
screen and operation vary depending on the broadcasts.
ATV (Analogue TV)
You can run the auto installation to set channels
automatically.
1
To watch the analogue TV, select “ATV” from
“Auto installation” in Programme setup menu.
(See page 5.)
2
After setting the channels, you can select a
channel using CH
r
/
s
or 0 – 9 on the remote
control unit. (See page 4.)
DTV (Digital TV)
When the TV accesses to DTV mode for the fi rst
time, you need to run the auto search. To scan all
available services in your area, follow the procedures
below.
1
To watch the DTV broadcasts, select “DTV” from
“Auto installation” in Programmme setup menu.
(See page 5.)
2
After setting the channels, you can select a
channel using CH
r
/
s
or 0 – 9 on the remote
control unit. (See page 4.)
Switching the analogue audio
format
You can switch between multiple audio modes
when watching a multiple audio or stereo broadcast
programme.
ATV/DTVATV
/
DTV
In the NICAM TV broadcasts
When receiving a stereo signal
Each time you press MPX, the mode switches
between NICAM STEREO and MONO.
Stereo mode
B/G
STEREO
BBC1
B/G
MONO
PAL
NICAM
PAL
ATV ATV
BBC1
When receiving a bilingual signal
Each time you press MPX, the mode switches
among NICAM CH A, NICAM CH B, NICAM CH AB
and MONO.
Bilingual mode
B/G
CH A
BBC1
B/G
CH B
PAL
NICAM
PAL
NICAM
ATV ATV
BBC1
B/G
MONO
BBC1
B/G
CH AB
PAL PAL
NICAM
ATV ATV
BBC1
When receiving a monaural signal
Each time you press MPX, the mode switches
between NICAM MONO and MONO.
Monaural mode
B/G
MONO
BBC1
B/G
MONO
PAL
NICAM
PAL
ATV ATV
BBC1
Direct Button Operation
LC-60LE360X_EN_G212.indd 11LC-60LE360X_EN_G212.indd 11 7/3/2014 2:57:22 PM7/3/2014 2:57:22 PM