Filter
Top Products
-
13
PC compatibility chart
Resolution
Horizontal
Frequency
Vertical
Frequency
VESA
Standard
Analogue
(D-Sub)
Digital (HDMI)
VGA
640
g
480
31.5 kHz 60 Hz
SVGA
800
g
600
37.9 kHz 60 Hz
XGA
1024
g
768
48.4 kHz 60 Hz
WXGA
1360
g
768
47.7 kHz 60 Hz
1080P
1920
g
1080
67.5 kHz 60 Hz
DDC is a registered trademark of Video Electronics Standards Association.
Power Management is a registered trademark of Sun Microsystems, Inc.
VGA, SVGA, XGA and WXGA are registered trademarks of International Business Machines Corporation.
PC Control of the TV
• When a programme is set, the TV can be controlled from
the PC using the RS-232C terminal.
The input signal (PC/video) can be selected, the volume
can be adjusted and various other adjustments and settings
can be made, enabling automatic programmed playing.
• Attach an RS-232C cable cross-type (commercially
available) to the Din/D-sub RS-232C for the connections.
NOTE
• This operation system should be used by a person who is
accustomed to using PCs.
Communication conditions
Set the RS-232C communications settings on the
PC to match the communications conditions of the
TV. The communications settings of the TV are as
follows:
Baud rate: 9,600 bps
Data length: 8 bits
Parity bit: None
Stop bit: 1 bit
Flow control: None
Communication procedure
Send the control commands from the PC via the
RS-232C connector.
The TV operates according to the received command
and sends a response message to the PC.
Do not send multiple commands at the same time.
Wait until the PC receives the OK response before
sending the next command.
Command format
Eight ASCII codes
e
CR
C1 C2 C3 C4 P1 P2 P3 P4
Command 4-digits Parameter 4-digits Return code
Command 4-digits: Command. The text of four characters.
Parameter 4-digits: Parameter 0 – 9, space, ?
Parameter
Input the parameter values, aligning left, and fi ll with
space(s) for the remainder. (Be sure that four values
are input for the parameter.)
When the input parameter is not correct, “ERR”
returns. (Refer to “Response code format”.)
a 30
0009
0
Response code format
Normal response
OK
Return code (0DH)
Problem response (communication error or incorrect
command)
ERR
Return code (0DH)
RS-232C commands list
Commands
• Commands not indicated here are not guaranteed to operate.
CONTROL ITEM COMMAND PARAMETER CONTROL CONTENTS
POWER SETTING P O W R 0
___
POWER OFF (STANDBY)
INPUT SELECTION
ITGD
____
INPUT SWITCHING (TOGGLE)
ITVD
____
ATV (CHANNEL FIXED)
IDTV
____
DTV (CHANNEL FIXED)
IAVD
*
___
INPUT 1 – 9 (1 – 9)
CHANNEL
DCCH
**
__
ATV DIRECT CHANNEL (1 – 99)
CHUP
____
ATV CHANNEL UP
CHDW
____
ATV CHANNEL DOWN
DTVD
***
_
DTV DIRECT CHANNEL (1 – 999)
DTUP
____
DTV CHANNEL UP
DTDW
____
DTV CHANNEL DOWN
AV MODE SELECTION
AVMD0
___
TOGGLE
AVMD1
___
STANDARD
AVMD2
___
MOVIE
AVMD5
___
DYNAMIC
AVMD6
___
DYNAMIC (FIXED)
AVMD7
___
PC
VOLUME V O L M
***
_
VOLUME (0 – 100)
POSITION
HPOS
***
_
H-POSITION (PC) (000 – 180)
VPOS
***
_
V-POSITION (PC) (000 – 120)
CLCK
***
_
CLOCK (000 – 180)
PHSE
***
_
PHASE (000 – 015)
WIDE MODE
WIDE0
___
TOGGLE (AV)
WIDE1
___
NORMAL (AV)/4:3 (USB – MOVIE)
WIDE2
___
ZOOM 14:9 (AV)
WIDE3
___
PANORAMA (AV)
WIDE4
___
FULL (AV)/16:9 (USB – MOVIE)
WIDE5
___
CINEMA 16:9 (AV)
WIDE6
___
CINEMA 14:9 (AV)
WIDE7
___
NORMAL (PC)
WIDE9
___
FULL (PC)
WIDE10
__
DOT BY DOT (PC)
WIDE11
__
UNDERSCAN
WIDE12
__
AUTO (USB – MOVIE)
WIDE13
__
JUST SCAN (USB – MOVIE)
MUTE
MUTE0
___
TOGGLE
MUTE1
___
MUTE ON
MUTE2
___
MUTE OFF
SRS TS HD
ACSU0
___
SRS TS HD TOGGLE
ACSU1
___
SRS TS HD ON
ACSU2
___
SRS TS HD OFF
AUDIO CHANGE
ACHA
____
TOGGLE
SLEEP TIMER
OFTM0
___
OFF
OFTM1
___
SLEEP TIMER 30 MIN
OFTM2
___
SLEEP TIMER 1 HOUR
OFTM3
___
SLEEP TIMER 1 HOUR 30 MIN
OFTM4
___
SLEEP TIMER 2 HOUR
OFTM5
___
SLEEP TIMER 2 HOUR 30 MIN
TEXT
TEXT0
___
TEXT OFF
TEXT1
___
TEXT CHANGE TOGGLE
NOTE
• If an underbar (_) appears in the parameter column, enter a space.
• If an asterisk (*) appears, enter a value in the range indicated in brackets under CONTROL CONTENTS.
Using a PC
LC-60LE360X_EN_G212.indd 13LC-60LE360X_EN_G212.indd 13 7/3/2014 2:57:23 PM7/3/2014 2:57:23 PM