Filter
Top Products
16
Connect the processor unit and the battery unit wirelessly.
Installation Examples and Communication Distance
The processor unit and the battery unit of this system each has an antenna for
wireless communication on the side with the SONY logo. When wirelessly
connecting the processor unit and the battery unit, install them referring to the
following installation examples.
The gray portions in the following diagrams indicate the areas in which wireless
communication is possible.
Flat placement
Top view
Side view
Placement with the Supplied
Stand
Top view
Side view
• When the battery unit is placed flat on a horizontal surface, wireless communication is
achieved mainly through radio waves reflected off the ceiling or walls. If the
communication distance is shortened due to your room environment, use the supplied
stand for a longer communication distance.
Using in Wireless Communication
Approx. 2.5 m (8.2 feet)
Approx. 2.5 m (8.2 feet)
SONY logo
Approx. 5 m (16.4 feet)
Ceiling
Approx. 5 m (16.4 feet)
With the
SONY logo
side upward
Radio wave
Approx. 3.5m (11.5feet)
Approx. 3.5m (11.5feet)
Approx. 7 m (23 feet)
SONY logo
Radio wave
Face the SONY logo side
toward the battery unit.
Approx. 7 m (23 feet)
Face the SONY logo
side toward the
processor unit.
Tip