Filter
Top Products
45
Other Issues
Symptom Cause/Action
“Control for HDMI” on a TV
cannot be used to control
the playback equipment
even when the system’s
HDMI pass-through is
used
Refer to the instruction manual supplied with your TV,
and in the TV’s “Control for HDMI” setting, specify
playback equipment connected to the processor unit as
the controlling device.
Head mounted unit
buttons are unresponsive
Buttons on the head mounted unit do not function
unless you are wearing it.
“DEMO” appears in the
upper-right corner of the
setting menu screen
Contact your Sony dealer or local authorized Sony
service center.
Cannot adjust “Language
setting” because the
setting menu is in an
unfamiliar language
If initial setup is not finished, press the button
repeatedly to return to the language selection screen,
and then select your preferred language again.
If you have finished initial setup, follow these steps to
restore the system to the original, factory settings and
specify the correct language.
1 Press the MENU button to display the setting menus.
2 Press the button, select “ General Setup,” and
then press the MENU button.
3 Press the button and move the cursor to the bottom
setting.
4 Press the MENU button. (A “Reset to factory settings”
confirmation message is displayed.)
5 Press the button, and then press the MENU button.
(The system will restart.)
6 After the initial setting screen is displayed, press the
/ buttons to select your preferred language, and
then press the button.
7 Follow the instructions displayed to finish initial setup.
Discomfort in the nose or
forehead from contact
with the head mounted
unit
Adjust the position of the forehead supporter forward or
downward (page 20).