Filter
Top Products
44
Charging
HDMI Control
Symptom Cause/Action
Charging cannot be
performed
Charging time is extended
Make sure that the AC adaptor and AC power cord are
firmly connected.
Charging may not be performed in excessively cold or
hot places. Perform charging under temperatures from
5 °C to 35 °C (41 °F to 95 °F).
Longer charging time is required if you charge with the
system turned on. Turn off the system before charging.
Charging may not be possible when the processor unit
and the battery unit are connected in wireless mode. To
perform charging, turn off the power of the units, or use
wired connection.
The battery may be deteriorated if the system has not
been used in more than one year. Contact your Sony
dealer or local authorized Sony service center.
Symptom Cause/Action
Connected equipment
cannot be controlled using
the buttons on the head
mounted unit
Make sure the “Control for HDMI” setting in “General
Setup” is set to “On” (page 36).
Make sure the connected equipment supports the HDMI
CEC functions.
Make sure “Control for HDMI” setting of the connected
equipment is configured correctly. For details, refer to
the instruction manual of the equipment used.
The connected AV amplifier (receiver) may not be
compatible with the system’s “Control for HDMI”
function. “Control for HDMI” function will not work
correctly in this case.
Controlling connected equipment by pressing buttons
on the head mounted unit may not be possible
immediately after turning the system on, or immediately
after activating “Control for HDMI” in “General Setup.”
Controlling connected equipment is not possible when
“Picture Mode” is set to “Game1,” “Game2,” “Game3”, or
“Game4” (page 30).