Filter
Top Products
23
Attaching and Replacing
Earbuds
Bass may be inaudible unless earbuds
fit well. For a better listening
experience, try a different earbud size
or adjust the position of the earbuds,
so that they fit perfectly in your ears.
Medium-sized earbuds are initially
attached to the headphones, at the
time of purchase. If the earbuds feel
uncomfortable, try replacing them
with the supplied large or small
earbuds. Earbud sizes are color-coded
and can be identified by the color
inside.
To avoid having the earbuds come off
in your ear, be sure to attach earbuds
securely to the headphones when
replacing them.
Earbud sizes (inside color)
To detach an earbud
While holding the headphone securely,
twist the earbud as you pull it off.
• If the earbud slips in your fingers and
remains attached, try holding it with a dry
cloth for a better grip.
To attach an earbud
Push the parts inside of the earbud into the
headphone until the projecting part of the
headphone is fully covered.
About noise isolation earbuds
Supplied noise isolation earbuds
provide a snug fit for effective
attenuation of ambient noise.
• Prolonged use of snugly fitting earbuds
may strain your ears. If you experience
discomfort, discontinue use.
• The pressure-relieving urethane cushion
is extremely soft. If it breaks or detaches
from the earbuds, it will not take its
correct position and the earbuds will lose
their noise isolation function.
• The urethane cushion may deteriorate
over time. If the pressure-relieving power
is lost and the urethane cushion hardens,
the earbuds may lose their noise isolation
function.
• Do not wash the earbuds. Keep them dry,
otherwise they may deteriorate quickly.
Replacing Consumables
The following replacement parts are
available.
•Earbuds*
•Light blocker (Top) (1 each for the left
and right)
•Light blocker (Bottom)
Small Large
SS
(Red)
S
(Orange)
M
(Green)
L
(Light
blue)
Tip
Colored parts
Notes
S (Orange) M (Green) L (Light blue)
Pressure-relieving
urethane cushion