Filter
Top Products
31
Color
Temperature
Adjusts image color temperature.
Natural: Automatically optimizes color temperature for
each “Picture Mode,” based on characteristics of
human vision.
Cool: Cool blue color tones.
Medium: Color tones between “Cool” and “Warm 1/
Warm 2.”
Warm 1/Warm 2: Warm red color tones. “Warm 2” is
redder than “Warm 1.”
Panel Drive Mode Select the type of display method for image motion.
Normal: Standard image appearance.
Clear: Reduces blurring of fast-moving images.
• Although selecting “Clear” reduces blurring of fast-moving
images, it also darkens the screen as a whole. If this is
distracting, select “Normal.”
• The screen as a whole may appear to flicker, depending on
the source signal. If this is distracting, select “Normal.”
Clear Black Adjusts the appearance of dark image areas to fit the
selected “Picture Mode.”
Sharpness-Hi Controls thin edges and fine texture of images to make
the images stand out or softer.
Sharpness-Mid Controls thick edges and rough texture of images to
make the images stand out or softer.
Noise Reduction Reduces random image noise, similar to static.
High/Medium/Low: Select the level of this effect.
Off: Deactivates this function.
Contrast
Remaster
Automatically optimizes black and white levels, for
good contrast without faded blacks or whites.
High/Medium/Low: Select the level of this effect.
Off: Deactivates this function.
Display Size Selects the image display size.
100%
: Displays the image in full-screen.
90%/80%/70%: The display size is reduced to 90%,
80%, or 70%, respectively.
Screen
Not available during 3D
playback.
The setting returns to
“Normal” if you perform
an adjustment using
the “Lens span
adjustment” menu
(page 28).
Normal: Displays the original image.
Theater1: Outputs the image simulated as in a theater,
viewed thorough a curved screen.
Theater2: Outputs the image simulated as in a theater
with a CinemaScope screen more than “Theater1.”
Notes