Appendix
117
Panel Array Mode
The Windows Client
Problem Resolution
Low resolution video in Panel
Array Mode.
Increase the number of panels that are displayed.
Some users only receive a partial
image when multiple remote
users are logged in concurrently.
The first user to invoke Panel Array Mode should
set it to display a minimum of four panels.
Problem Resolution
Windows Client won't connect to
the KL9108 / KL9116.
DirectX 7.0 or higher must be installed on your
computer.
Remote mouse pointer is out of
sync.
1. Use the AutoSync feature (see Video Adjust-
ment, page 76), to sync the local and remote
monitors.
2. If that doesn't resolve the problem, use the
Adjust Mouse feature (see Adjust mouse,
page 75) to bring them back in sync.
3. If the two methods described above fail to
resolve the problem, use the Toggle Mouse Dis-
play function (see page 75).
Part of the remote window is off
my monitor.
If Keep Screen Size (see page 64) is not enabled,
use the AutoSync feature (see Video Adjustment,
page 76) to synchronize the local and remote
monitors.
The remote screen display is
rotated 90 degrees.
Enable Keep Screen Size (see page 64).
I cannot run Net Meeting when
the Windows Client is running.
Enable Keep Screen Size (see page 64).
