Chapter 4. Administration
43
Service Configuration
Access Port
As a security measure, if a firewall is being used, the Administrator can specify
the port numbers that the firewall will allow, and set the firewall accordingly.
Users must specify the port number when they log in to the KL9108 / KL9116.
If an invalid port number (or no port number) is specified, the KL9108 /
KL9116 will not be found.
Note: 1. If there is no firewall (on an intranet, for example), it doesn't matter
what these numbers are set to, since they have no effect.
2. You must set different values for each of the service ports.
An explanation of the fields is given in the table below:
Field Explanation
Program This is the port number that must be specified when connecting
from the Windows Client software program. Valid entries are from
1024 - 60,000. The default is 9000.
Java This is the port number used for Java Client connections. Valid
entries are from 0 - 65535. Entering 0 disables the Java Client
feature and prohibits users from connecting to the KL9108 /
KL9116 via the Java Client. The default is 9002.
