A SERVICE OF

logo

KL9108 / KL9116 User Manual
46
RADIUS
If you are using a RADIUS server, RADIUS Configuration allows you to set
up its parameters:
1. Check Enable.
2. Fill in the IP addresses and Service Ports for the Primary and Alternate
RADIUS servers.
3. Set the time in seconds that the KL9108 / KL9116 waits for a RADIUS
server reply before it times out in the Timeout field.
4. Set the number of RADIUS retries allowed in the Retries field.
5. Key the Shared Security character string that you want to use for
authentication between the KL9108 / KL9116 and the RADIUS Server in
this field.
(continues on next page)