RTM-ATCA-SXXX Overview
6806800H62B ATCA‐S201InstallationandUseGuide35
4.1 Enable HTML browser access
The web browser configuration tool may be enabled or disabled for security reasons.
CLI command syntax
Table 10 CLI command syntax, enable/disable GUI access
Convention atca_blade set_gui <enable> +
< enable> 0|1
Value 0 disables the GUI, value 1 enables the GUI.
4.2 HTML Security certificates (https:// )
The user may perform HTML configuration with any browser that supports https .
Direct your browser to the any active IP port on the ATCA-S201. The ATCA-S201
employs https (encrypted secure sockets layer- SSL) technology to protect
configuration activity that occurs over IP links. The ATCA-S201 issues a self-signed
certificate, identified as “EMERSON”. This certificate is not registered with a
certificate authority, and the browser will pop up a warning as shown below. Users
must accept the certificate to proceed.
4.3 HTML login screen
A user login is required to access and operate the ATCA-S201 storage blade. This
menu prompts the user for username and password. When shipped from the
factory, the default entries are username=admin, password=admin. See section
3.2.1for the information on the Password change procedure.
StorBlade99ATCA-S201 Enter Username and Password
Username:
Password:
Submit
