A SERVICE OF

logo

RTM-ATCA-SXXX Overview
6806800H62B ATCAS201InstallationandUseGuide80
7 iSCSI device setup tools
1
RS232
Console Setup
2
Ethernet
Comm. Setup
3
RAID
LUN Setup
4
Logical Volume
Setup
5
iSCSI
Device Setup
6
NFS / SMB
Share Setup
Configuration Step:
This chapter explains how to create one or more iSCSI LUNs for external host access. The
user must complete step 4 before this step can be accomplished.
iSCSI & NAS
AMC disk
modules
HW RAID
Physical
disks
sda
sdb
sdc
Zone-2 Fabric
Zone-2 Base
Zone-3 RTM
IP network
IP host
1:1 mapping (JBOD)
1:1 mapping (JBOD)
Site: B1
Site: B2
Site: B3
Site: B4
Logical
groups
&
volumes
vgz
vga
CIFS
share points
NFS
share points
iSCSI
LUNs
5
7.1 iSCSI configuration menu
Using the HTML configuration tool, navigate to this configuration page .
Emerson ATCA-S201 iSCSI iSCSI Configuration
This top html menu provides the ability to create an iSCSI target on a device (e.g.
/dev/vga/lva0) that was previously committed for iSCSI block I/O share (see chapter
).
7.1.1 Add or create an iSCSI target
These are the final steps to make an iSCSI device ‘appear’ on the IP network.