Emerson ATCA-S201 Manual

A SERVICE OF

next previous

RTM-ATCA-SXXX Overview

6806800H62B ATCA‐S201InstallationandUseGuide38

Emerson ATCA-S201

iSCSI

nfs

smb

Shares

LVM2

MD RAID

Ha rdwa re RAID

Physica l Disks

Maintenance

 Network

 Shelf

 I/O Status

 CPU Status

 ATCA Status

+

‐

+

+

+

‐

+

+

+



StorBlade99 ATCA-S201 Network Configuration

Submit All Network Changes

Add New VLAN VLAN Index Interface

System Identification and TimeZone

HostName DomainName Date Time TimeZone Nameservers NTPServerList

Use

NTP

Active

Settings

StorBlade99 domain.com 4/6/2009 08:51:59 New_York 0.0.0.0

tick.usask.ca

tock.usask.ca

y

New

Settings NTP

Submit

StorBlade99 domain.com tick.usask.ca

4/6/2009

08:51:59

New_York

ˇ

Base 0 [eth0] Network configuration

IPAddress NetworkMask Broadcast Gateway MTUSize MACAddress

ActiveSettings 192.168.200.30 255.255.255.0 192.168.200.255 192.168.200.1 1500 00:11:0D :xx:xx:xx

NewSettings DHCP Enable

192.168.200.30 1500

192.168.200.255

255.255.255.0

192.168.200.1

Base 1 [eth1] Network configuration

IPAddress NetworkMask Broadcast Gateway MTUSize MACAddress

ActiveSettings 192.168.200.31 255.255.255.0 192.168.200.255 192.168.200.1 1500 00:11:0D :xx:xx:xx

NewSettings DHCP Enable

192.168.200.31 1500

192.168.200.255

255.255.255.0

192.168.200.1

Management[eth2] Network configuration

IPAddress NetworkMask Broadcast Gateway MTUSize MACAddress

ActiveSettings 192.168.200.32 255.255.255.0 192.168.200.255 192.168.200.1 1500 00:11:0D:xx:xx:xx

NewSettings DHCP Enable

dhcp 1500

0.0.0.0

0.0.0.0

0.0.0.0



Fabric 0 [eth3] Network configuration

IPAddress NetworkMask Broadcast Gateway MTUSize MACAddress

ActiveSettings 192.168.43.11 255.255.255.0 192.168.43.255 192.168.43.1 9000 00:11:0D:xx: xx:xx

NewSettings DHCP Enable

192.168.43.11 9000

192.168.43.255

255.255.255.0

192.168.43.1



Fabric 1 [eth4] Network configuration

IPAddress NetworkMask Broadcast Gateway MTUSize MACAddress

ActiveSettings 192 .16 8.44.11 255.255.255.0 192.168.44.255 192.168.44.1 9000 00:11:0D:xx:xx:xx

NewSettings DHCP Enable

192.168.44.11 9000

192.168.43.255

255.255.255.0

192.168.44.1





0

eth0

ˇ

0.0.0.0



+

Figure 9 Emerson ATCA-S201  Maintenance  Network

Use the mouse to navigate and make changes to an item in the “new settings” row.

Notice that changes made here do not immediately change the “Active settings”

row. New settings changes are abandoned by navigating away from the page.

Changes are committed only when the “submit” button is clicked.

Submit

Note: Care should be taken when altering or disabling an interface being used for

HTML management. For example, if you shut down the interface being used for

HTML, existing communication is lost, and an alternate Ethernet port or RS232 cable

may be needed to re-enable it.

4.6 System Identification and Time Zone attributes

The attributes in this menu grouping establish time reference utilized by all aspects of

product operation.