RTM-ATCA-SXXX Overview
6806800H62B ATCA‐S201InstallationandUseGuide55
Table 24 ATCA status indication
Status item Description
PCI state Collection of values pertaining to AMC modules with PCI devices
Vendor
4 digit Hex value representing the PCI Vendor ID .
Device
4 digit Hex value representing the PCI device ID .
SVID
4 digit Hex value representing the PCI sub-system vendor ID .
(set to 0000 for non-PCI modules)
SSID
4 digit Hex value representing the PCI sub-system device ID .
(set to 0000 for non-PCI modules)
Bus/Slot/Func
Displays the OS assignments for bus, slot, and function of the PCIe device.
(set to 0000 for non-PCI modules)
AMC state Collection of values pertaining to AMC modules with PCI devices
Vendor
FRU data retrieved from the management device; it indicates the manufacturer of
the device.
Product
FRU data retrieved from the management device; it indicates the product name.
Model
FRU data retrieved from the management device; it indicates the model name.
Serial
FRU data retrieved from the management device; it indicates the serial number.
State
Indicates whether the AMC module is enable or disabled.
Present
Indicates the present pin is asserted, indicated the presence of a module
MgEna
Indicates management enable is asserted on the AMC
MgOK
Indicates management power is detected on the AMC
PayEna
Indicates payload enable is asserted on the AMC
PayOK
Indicates payload power is detected on the AMC
Button usage
Suppress
Warnings
‘Radio button’ when selected will eliminate the majority of ‘pop-up’ confirmations
that precede major configuration changes.
Allow GUI
and CLI
‘Radio button’ will allow an administrator to operate the GUI and CLI simultaneously.
Refresh
This button will redraw the display window.
Reboot
This button will reboot the storage blade, and all storage served by this blade will be
unavailable. The Blade will terminate all applications and shutdown its internal OS.
The blade will automatically reboot, by executing the uboot, kernel and applications
loaded in its flash memory.
Power Off
This button will power down the storage blade, and all storage served by this blade
will be unavailable. The Blade will terminate all applications and shutdown its
internal OS.
When the sequence completes all hot-swap LED indicators will illuminate “Blue”.
Manual operator action will be required to reboot the blade.
Enable
This button will enable AMC sites. When enabled, the menu will show the AMC state
as Enabled.
Disable
This button will disable AMC sites. When disabled, the menu will show the AMC state
as Disabled.
