RTM-ATCA-SXXX Overview
6806800H62B ATCA‐S201InstallationandUseGuide77
Note: The ‘share’ in this example is not yet visible externally via IP links, and external
hosts cannot yet access this resource. Administrator should proceed to chapter 8 to
create NFS or SMB mount points.
Upon completing these steps, the Mange share menu will update as shown below. Changes may be
applied by clicking the appropriate box and clicking ‘Update’.
CLI command syntax
Table 31 CLI command syntax, format a logical volume
Convention:
atca_blade set_shares Y <diskmask> Y Y +
<+skip>
Use to ‘Y’ designate which disk to format. Use skip in all other positions.
atca_blade set_shares Y skip Y Y Y +
Syntax example
#1 Designate disk ‘lva’ an iSCSI share called iSCSI_target_AA
atca_blade set_shares Y N Y N Y iSCSI_targetBB Y Y +
Syntax example
#2 Designate disk 2 of 2, an iSCSI share called iSCSI_target_BB
6.5.3 Un-commit an iSCSI share
The administrator may modify or un-share any currently shared logical device by
navigating to the html configuration screen:
Emerson ATCA-S201 Shares Manage Shares
The Manage shares menu displays the active status of all logical devices. Scroll to
the device of interest, and complete the steps below.
Emerson ATCA-S201
iSCSI
nfs
smb
Shares
Manage Shares
LVM2
MD RAID
Hardware RAID
Physica l Disks
Maintenance
‐
+
+
+
‐
+
+
+
+
+
