A SERVICE OF

logo

Appendix 2 - 21
MDS-D-SVJ3/SPJ3 Series Instruction Manual
Appendix 2-3 CM10-SP-CV reinforcing cover for straight plug
(3) In the same manner as in step 2, the CM10-SP-CV-A (without hexagon nut) set it.
(4) Set the hexagon socket head screw (M4x20), spring washers (for M4) and plain washers (for M4) onto
the covers. Using a hexagonal wrench or hexagonal screwdriver, tighten the right and left screw equally.
Take care to no gap the cover A and B after tighten the screw. And tighten them additionally with
tightening torque of 150cN•m.
[Before setting the Cover]
Slide
[After Assembly]