TL-R460 Cable/DSL Router User Guide
14
¾ WAN - This field displays the parameters applied to the WAN port of the router,
including “MAC address”, “IP address”, “Subnet Mask”, “Default Gateway” and so
on.
)
Note:
If PPPoE/L2TP/PPTP is chosen as the WAN connection type, the Disconnect button will
be shown here while you are accessing the Internet. You can also cut the connection by
clicking the button. If you have not connected to the Internet, a Connect button will be
shown, you can then establish the connection by clicking the button.
¾ Traffic Statistics: This field displays the router's traffic statistics.
¾ System Up Time: This field displays the time of the router running from the time it is
powered on or is reset.
4.2 Quick Setup
Please refer to Chapter 3"Quick Installation Guide."
4.3 Network
Choose menu “Network”, you can see the submenus under the Network menu: LAN,
WAN and MAC Clone.
Figure 4-2
Click any of them, and you will be able to configure the corresponding function. The
detailed explanations for each submenu are provided below.
4.3.1 LAN
Choose menu “Network→LAN”, you can configure the IP parameters of the LAN on the
screen below.
Figure 4-3
