TL-R460 Cable/DSL Router User Guide
57
automatically once it connects the Internet.
To configure the system manually:
Step 1: Select your local time zone.
Step 2: Enter date and time in the right blanks.
Step 3: Select Using Daylight Saving Time if you need, and configure the begin time
and end time for the function.
Step 4: Click Save to save the configuration.
To configure the system automatically:
Step 1: Select your local time zone.
Step 2: Enter the IP address for Primary NTP Server & Secondary NTP Server, then the
Router will get the time from the Primary NTP Server firstly.
Step 3: Click the Get GMT button to get system time from Internet if you have
connected to the Internet.
)
Note:
1) This setting will be used for some time-based functions such as firewall. You
must specify your time zone once you login to the router successfully, or else, the
time limited on these functions will not take effect.
2) The time will be lost if the router is turned off.
3) The router will obtain GMT time automatically from Internet if it has already
connected to the Internet.
4.11.2 Diagnostic
Choose menu “System Tools→Diagnostic”, you can transact Ping or Tracert function
to check connectivity of the internet on the screen (shown in Figure 4-54).
