TL-R460 Cable/DSL Router User Guide
20
necessary for your ISP.
¾ Service Name/AC Name - The service name and AC (Access Concentrator) name
should not be configured unless you are sure it is necessary for your ISP.
¾ ISP Specified IP Address - If you know that your ISP does not automatically
transmit your IP address to the router during login, select Use IP Address specified
by ISP and enter the IP in dotted-decimal notation, which your ISP provided.
¾ Detect Online Interval - The default value is 0, you can input the value between 0
and 120. The router will detect Access Concentrator online at every interval between
the time. If the value is 0, it means the Router does not detect.
¾ Primary DNS & Secondary DNS - If you know that your ISP does not automatically
transmit DNS addresses to the router during login, select Use the following DNS
servers and enter the address in dotted-decimal notation of your ISP’s primary DNS
server. If a secondary DNS server address is available, enter it as well.
4. 802.1X + Dynamic IP
If you are provided 802.1x + Dynamic IP for ISP connection, you should select
“802.1x + Dynamic IP” and enter the user name and password provided by ISP
(shown in Figure 4-8).
Figure 4-8
