TL-R460 Cable/DSL Router User Guide
62
Figure 4-61
)
Note:
Some settings of the router will take effect only after rebooting, which include:
1) Change LAN IP Address. (System will reboot automatically)
2) MAC Clone (system will reboot automatically)
3) DHCP service function.
4) Static address assignment of DHCP server.
5) Web Service Port of the router.
6) Upgrade the firmware of the router (system will reboot automatically).
7) Restore the router's settings to factory default (system will reboot automatically).
4.11.7 Password
Choose menu “System Tools→Password”, you can change the factory default user
name and password of the router on the next screen (shown in Figure 4-62). After
configuration, click the Save button.
Figure 4-62
)
Note:
1) It is strongly recommended that you change the factory default user name and
password of the router. All users who try to access the router's web-based utility
will be prompted for the router's user name and password.
2) The new user name and password must not exceed 14 characters in length and
must not include any spaces. Enter the new Password twice to confirm it.
