TL-R460 Cable/DSL Router User Guide
48
shown in Figure 4-42.
Step 2: Enter the appropriate Destination IP Address, Subnet Mask and Default
Gateway, and then select the status.
Figure 4-42
Step 3: Click Save to make the entry take effect.
)
Note:
If you want to add more than one static route, please go to step 1 to continue.
Other configurations for the entries as shown in Figure 4-30:
Click the Delete button to delete the entry.
Click the Enable All button to enable all the entries.
Click the Disable All button to disable all the entries.
Click the Delete All button to delete all the entries.
Click the Previous button to view the information on the previous screen, click the Next
button to view the information on the next screen.
4.8 IP QoS
Choose menu “IP QoS”, you can configure the IP QoS function on the next screen
(shown in Figure 4-43).
