TL-R460 Cable/DSL Router User Guide
24
then enter the following parameters (shown in Figure 4-12).
Figure 4-12
¾ User Name & Password - Enter the User Name and Password provided by your
ISP. These fields are case-sensitive
¾ Connect & Disconnect - Click the button, you can handle the on-line connection
or disconnection
¾ Dynamic IP & Static IP - Select the type of IP address under your ISP’s
introduction (We select Dynamic IP for example as shown in Figure 4-12).
¾ Server IP Address/Name - Please type the correct Server IP Address/Name which
your ISP provided.
¾ MTU Size (in bytes) - The default value is 1420, which is usually fine. For some
ISPs, you need modify the MTU. This should not be done unless you are sure it is
necessary for your ISP.
)
Note:
Please refer to 3 PPPoE for the explanations of Connect on Demand, Connect
Automatically, Connect Manually.
9. Dual Access/Russia PPPoE
If you are provided Dual Access/Russia PPPoE for ISP connection, your ISP will
