TL-R460 Cable/DSL Router User Guide
58
Figure 4-54
¾ Choose Mode - Check the radio button to select one diagnostic tool.
z Ping - This diagnostic tool troubleshoots connectivity, reachability, and name
resolution to a given host or gateway.
z Tracert - This diagnostic tool tests the performance of a connection.
)
Note:
You can use ping/tracert to test both numeric IP address or domain name. If
pinging/tracerting the IP address is successful, but pinging/tracerting the domain
name is not, you might have a name resolution problem. In this case, ensure that
the domain name you are specifying can be resolved by using Domain Name
System (DNS) queries.
IP Address/Domain Name - Type the destination IP address (such as 220.181.6.18) or
Domain name (such as http://www.tp-link.com).
¾ Number of Pings - Set the number of Ping packets for a Ping connection.
¾ Ping Size - Set the size of Ping packet.
¾ Ping Timeout - Set the waiting time for the reply of each Ping packet. If there is no
reply in the specified time, the connection is overtime.
¾ Tracert Hops - Set the max number of hops for a Tracert connection.
Click Start to check the connectivity of the Internet.
The Diagnostic Results page displays the result of diagnosis.
