A SERVICE OF

logo

Open as PDF
next previous
Xerox 4112/4127 Copier/Printer User Guide
8-6
8. Paper and other Media
Loading Paper into Tray 5 (Bypass)
When using Tray 5 (Bypass):
• You must manually enter the paper size
• If you use a non-standard paper size often, you can preset the
paper size in the device. The preset size then displays under
Standard Sizes in the Tray 5 (Bypass) screen. For
information about setup, refer to “Tray 5 (Bypass) - Paper Size
Defaults” in the System Administration Guide.
• You can load up to 280 sheets of 20 lb/ 75 gsm paper
KEY POINT: Do not load mixed size paper into Tray 5 (Bypass).
1. Gently extend Tray 5 (Bypass) as necessary to accommodate
the paper.
2. Hold the center of the paper guides and slide them to the
desired paper size.