A SERVICE OF

logo

Open as PDF
next previous
Xerox 4112/4127 Copier/Printer User Guide
12-68
12. Problem Solving
Paper jams at tri-fold output tray 2d and lever 2g
1. Make sure that the machine has stopped printing and then
open the right cover on the finisher.
2. Pull out the tri-fold output tray 2d, swing lever 2g to the right,
and remove the jammed paper.
NOTE: If paper is torn, check inside the machine and remove it.
3. Return lever 2g to the original position and push back the
tri-fold output tray 2d.
4. Close the Finisher right cover completely. The machine will not
operate if the cover is open even slightly.