Xerox 4112/4127 Copier/Printer User Guide
13-9
13. Specifications
Standard Finisher specifications
Item Specification
Tray Type • Output Tray: Collated/Uncollated
• Finisher Tray: Collated/Uncollated (Offset available)
• Booklet Tray: Collated/Uncollated
Supporter Paper Size Top Tray:
z
Maximum: A3, 12.6 x 19.2î (330 x 488 mm)
z
Minimum: A6 (postcards)
Finisher Tray:
z
Maximum: 12.6 × 19.2" (330 x 488 mm)
z
Minimum: B5
Supported Paper Weight
Top Tray and Finisher Tray: 52 - 253 g/
m
2
Capacity
500 sheets
Important: When using Xerox 20 lb./75 g/
m
2
paper.
Tray Capacity Top Tray: 500 sheets
Finisher Tray:3,000 sheets, 200 sets*
Note: * When using A4 , B5 , 8.5 × 11" , 8 x 10” , 7.5 x 10.5” , 16K
only. When using paper of other sizes, tray capacity is 1,500 sheets and 100
sets.
Stapling (variable-length)
Maximum stapled sheets: 100 sheets
Note: When using paper of size larger than A4 or 8.5 Þ 11", the maximum
number of sheets that can be stapled is 65.
Note: Staple nails may bend when using certain paper types.
Paper size :
z
Maximum: A3, 11 x 17"
z
Minimum: B5
Staple position :
z
1 location: (front: angled stapling, center: parallel stapling, back:
parallel stapling*)
z
2 locations: (parallel stapling)
Note: *: Angled stapling for A3 and A4
Hole Punching Supported paper size:
z
Maximum: A3, 11 x 17"
z
Minimum: B5 (2 holes), A4 (4 holes)
Number of holes: 2, 4, 3 (optional)
Paper type: 52 - 200 g/
m
2
Folding See Booklet-Maker Finisher specifications
