Alpine DHA-S690 Car Stereo System User Manual


 
8-EN
ALPINE DHA-S690 68-09359Z17-A (EN)
2
Set discs in the disc tray with the labeled side
facing up. Set one disc in the tray at a time (up to 6
discs).
Be careful not to drop the disc.
After loading the discs, push the disc tray fully into
the magazine until it closes and a click is heard.
3
Grasp the sliding door knob and slide the door
fully to the right.
4
Make sure the magazine is in the proper direction
(top/bottom and front/back), then push it in fully
until a click is heard and the magazine is locked in
place.
5
After inserting the magazine, grasp the tab of the
sliding door and slide the door all the way to the
left until it locks with a “click”.
•When the magazine is inserted, a check of the disc inside the magazine is
performed automatically.
Disc tra
y
Sliding door
Removing discs
1 Grasp the sliding door knob and slide the door
fully to the right.
2 Press the eject button to eject the magazine, then
remove the magazine.
3 Pull the tray removal knob with your finger and
draw the disc tray out of the magazine.
Pay attention to the disc’s signal surface when
removing discs. (See “PRECAUTIONS” on
page 4.)
Tray removal knobMagazine
Sliding door
Eject button
Do not remove the disc tray from the magazine.
When the disc tray is pulled out from the magazine, do not pull it out
with excessive force. Doing so will cause breakdown.
Cautions on using the magazine
This product’s magazine is used exclusively for this
product. CD changer magazines (included magazines or
accessories) cannot be used with this product.
Disc trays for CD changer magazines cannot be used with
this product’s magazine. Such trays can be inserted for
reasons of structure, but using them may damage this
product. Never use disc trays for CD changer magazines.
Do not forcibly remove the magazine.
Only one disc can be inserted per tray. Attempting to insert
two or more discs will result in damage.
Never remove the tray from the magazine.
•Even when the ignition key is set to OFF, the magazine
can be removed.