Filter
Top Products
40-EN
ALPINE DHA-S690 68-09359Z17-A (EN)
Connections
Connect to a metal part of
chassis body with a screw
Ignition Key
To remote control output
lead
Remote Control Eye
Cable Colour Cable Specifications
Fuse
(5A)
Yellow
Red
White/
Brown
Black
•S video Output Terminal
Outputs S video signal.
Connect to the input terminal of S video of connected devices.
• Digital Output Terminal (Optical)
This terminal is used to connect DHA-S690 to ALPINE digital audio
processor (PXA-H700,etc.).
An optional fiber optic cable that will plug directly into the Digital Output
Terminal of the DHA-S690.
•Video Output Connector
This connector is used in combination with the video inputs of another
video product (AV head unit or TV monitor).
•Audio Output Connectors
This output may be connected to a Rear Monitor with a volume control
or an auxiliary audio preamp.
This is used to monitor the DVD audio while the main audio system is
being driven by another source (such as Radio or CD).
• Ai-NET Connector
Connect this to the output or input connector of other product equipped
with Ai-NET.
• Remote Control Eye Jack
Connect this to the remote control sensor unit. Not used when using
a monitor with a built-in remote control sensor unit. A remote control
sensor unit is needed when a monitor or navigation unit made by other
company is connected.
•Ground Lead
Connect this lead to a good chassis ground on the vehicle. Make sure
the connection is made to bare metal and is securely fastened using
the sheet metal screw provided.
• Battery Lead
Connect this lead to the positive (+) post of the vehicle’s battery.
•Switched Power Lead (Ignition)
Connect this lead to an open terminal on the vehicle’s fuse box or
another unused power source which provides (+)12V only when the
ignition is turned on or in the accessory position.
When connecting with the Ai-NET compatible AV head unit or the
Ai-NET compatible head unit, do not connect the ignition lead.
• Remote Control Input Lead
This lead is used in combination with the Ai-NET compatible AV head
unit or the ALPINE monitor with a remote control output lead.
Red (R)
White (L)
Yellow
Yellow
White/Brown
Black
Red
BATTERY
IGNITION
REMOTE IN
GND
• Connect properly. Never connect to parts other than the ones indicated in these operating instructions.
• Also refer to the operating instructions of the other products in the system.