Filter
Top Products
34-EN
ALPINE DHA-S690 68-09359Z17-A (EN)
Indication
• Mechanism error.
1) Press c and eject the magazine (disc).
If the disc does not eject, press c again for at least 3
seconds and eject the magazine (disc).
If the disc still does not eject, consult your Alpine dealer.
2) When the error indication remains after ejecting, press c
again.
If the error indication still does not turn off after pressing
c a few times, consult your Alpine dealer.
• The temperature in the car is too low.
- Raise the temperature in the car to normal temperature.
• No disc is inserted.
- Insert a disc.
• Remote control operation is not possible.
-For some discs or playing modes, certain operations are not
possible. This is not a malfunction.
(When the red indicator is displayed, disc operation is
prohibited.
When the white indicator is displayed, unit playback is
prohibited.)
• Disc does not match regional code number.
- Load a disc that matches the regional code number.
• Protective circuit is activated at high temperature.
- The indicator will disappear when the temperature returns to
within operation range.
- Leave the power OFF until the temperature decreases and
then turn the power ON again.
DISC ERROR
• Mechanism error.
1) Press c and eject the magazine (disc).
If the disc does not eject, turn the power off once and then
on again, then press c for at least 3 seconds and eject the
magazine (disc).
If the disc still does not eject, consult your Alpine dealer.
2) When the error indication remains after ejecting, press c
again.
If the error indication still does not turn off after pressing
c a few times, consult your Alpine dealer.
• Displays if a disc differs from the setting on the device.
- Sets in “Setting the TV System” (page 21).
LOADING ERROR
EJECT ERROR
NO DISC
REGIONAL CODE
VIOLATION
HI-TEMP
VIDEO SIGNAL
SYSTEM IS NOT
CORRECT