Alpine DHA-S690 Car Stereo System User Manual


 
14-EN
ALPINE DHA-S690 68-09359Z17-A (EN)
DVD-VR (while playing back programme)
DVD-VR (while playing back Playlist)
VIDEO CD
DivX
®
Display example when “ALL” is set in “Setting Compression
Playback Data” (page 22).
•The track/disc repeat modes cannot be used on video CDs with
playback control (PBC). Set VCD PLAY MODE to turn the PBC
function off. Refer to “Setting the Video CD Play Mode” (page 22).
•Depending on the DVD-VR disc, the repeat mode may not be
changed.
During playback, pressing and holding REPEAT for at least 2
seconds will change the unit to REPEAT OFF.
Switching the Audio Tracks
For discs with multiple audio or audio languages, you can switch the
audio language temporarily during playback.
During playback, press AUDIO.
The sound switches between the alternate audio tracks
recorded on the disc each time the button is pressed.
•The selected audio track becomes the default setting every time the
power is turned on or the disc is replaced. Depending on the disc,
the unit plays back the disc’s specified language.
Not all discs will allow changing the alternate audio tracks during
playback. In these cases, select audio tracks from the DVD’s menu.
There may be a delay before the selected alternate track begins to play.
DVD-VR/Video CDs with multiplex audio
DVD-VR
During playback, press and hold AUDIO for at least 2
seconds.
The left and right channels will be output as shown below, each
time the button is pressed.
LR LL RR LR
Video CD
During playback, press AUDIO.
The left and right channels will be output as shown below, each
time the button is pressed.
LR LL RR LR
Switching the Angle
On DVDs in which scenes have been filmed from multiple angles, the
angle can be switched during playback.
During playback, press ANGLE.
The angle switches between the angles recorded on the disc
each time the button is pressed.
Some time may be required for the angle to change.
Depending on the disc, the angle may switch in one of two ways.
- Seamless: The angle switches smoothly.
- Non-seamless: When the angle is switched, a still picture is
displayed first, after which the angle switches.
If the DVD-Audio disc is set to “VIDEO ON”, operation can be
performed. (Refer to “Setting the DVD Audio Playback Mode” on
page 20.)
The track is played repeatedly.
The entire disc is played
repeatedly.
Playback does not repeat.
(Factory default)
REPEAT TRACK
REPEAT DISC
REPEAT OFF
The chapter is played repeatedly.
The playlist is played repeatedly.
The entire disc is played
repeatedly.
Playback does not repeat.
(Factory default)
REPEAT CHAPTER
REPEAT PLAYLIST
REPEAT DISC
REPEAT OFF
The chapter is played repeatedly.
The programme is played repeatedly.
The entire disc is played
repeatedly.
Playback does not repeat.
(Factory default)
REPEAT CHAPTER
REPEAT PROGRAM
REPEAT DISC
REPEAT OFF
The file is played repeatedly.
The folder played repeatedly.
The entire disc is played
repeatedly.
The mode returns to normal
playback. (Factory default)
REPEAT FILE
REPEAT FOLDER
REPEAT DISC
REPEAT OFF