Filter
Top Products
41-EN
ALPINE DHA-S690 68-09359Z17-A (EN)
Setting the System Switch
Switch to operate from either an Ai-NET compatible head unit or Ai-NET compatible AV head unit connected to this unit.
Be sure to set the system switch before fastening the DHA-S690 in place.
1
Disconnect the power plug.
2
Change the System Switch (Fig. 1).
This switch is used to select Ai-NET or Stand Alone operation. Change the switch position using a small screwdriver or
other pointed object.
1:
When connecting to an Ai-NET compatible head unit or Ai-NET compatible AV head unit.
If set to 2, with any of the Ai-NET compatible (AV) head units connected, you may not be able to operate from the head unit, or listen to
audio from some external devices, etc.
The factory default is 1.
2:
When connecting to an Ai-NET incompatible head unit or another manufacturer
,
s head unit.
CAUTION:
When switching the System Switch, make sure there are no cables attached to the DHA-S690.
3
Connect the power plug.
12
12
1
Ai-NET system Stand Alone system
Fig. 1
1
1 2
System Example
Setting of DHA-S690
The DHA-S690’s system settings must be
made after connections are completed.
Before fixing the unit in place, refer to
page 41 to change the system setting.
System Switch
12
Switches to “2”.
• Be sure to connect the switched Power Lead (Ignition).
• Also refer to the operating instructions of the other products in the system.
Audio Output Connector
Video Output
Connector
Audio Input
Terminal
Video Input
Terminal
RCA Extension Cable
(included)
RCA Extension
Cable
DHA-S690
Monitor
(sold separately)
Monitor
B.BOX
(sold separately)
Remote Control
Eye Jack
Remote
Control Eye
•
Connecting a Monitor