Alpine DHA-S690 Car Stereo System User Manual


 
19-EN
ALPINE DHA-S690 68-09359Z17-A (EN)
SETUP
You can flexibly customize the unit to suit your own preferences and
usage. From the SETUP menu, System Setting, Audio Setting, etc.
can be modified.
Use steps 1 to 4 to select one of the SETUP modes
to modify. See the applicable section below for
details about the selected SETUP item.
SETUP Operation
You can perform setup operation when disc playback is
stopped (STOP), or no disc is inserted in the magazine
while the car is stopped.
1
Press and hold SETUP for at least 2 seconds.
The SETUP menu is displayed.
2
Press 8 or 9 to select the desired setup item, then
press ENT.
Setting items: SYSTEM SETUP / DVD CONTENTS SETUP /
CD CONTENTS SETUP / AUDIO SETUP
3
Select setting items or setting contents you want
to change in the selected setup by pressing 8, 9,
;, :, and press ENT.
Setting items
SYSTEM SETUP:
BACK PICTURE / TV SCREEN(ASPECT / TV SYSTEM) /
AUTO DISC CHANGE / VIDEO DELAY / MODEL SETUP /
SETUP INITIALIZE
DVD CONTENTS SETUP:
LANGUAGES(AUDIO
/
SUBTITLE
/
MENU) / PARENTAL
(PASSWORD COUNTRY CODE / PARENTAL LEVEL /
CHANGE PASSWORD) / DVD-A PLAY MODE /
DVD-VR PLAY MODE / BONUS CODE / MAIN STORY /
AUTO DVD MENU
CD CONTENTS SETUP:
CD PLAY MODE / VCD PLAY MODE /
COMPRESS PLAY MODE(PRIORITY MODE/
COMBINATION MODE / JPEG STILL MODE) /
AUTO DISPLAY / REGISTRATION CODE
AUDIO SETUP:
DIGITAL OUT(DOLBY D/DTS) / DOWNMIX MODE
4
After setting, press and hold SETUP for at least 2
seconds.
Save the setting to exit the setting mode.
DVD CONTENTS SETUP
•When settings are changed, old settings are overwritten. Make a
note of the current settings before making changes. The settings are
not cleared even when the vehicle’s battery is disconnected.
Setting the language
The audio language, subtitle language and menu language can be set
according to your preferences.
Once set, this becomes the default language. This function is
convenient when you always want to listen in English. (Not all discs
allow changing the default language. If not, the factory default
language applies.)
Setting items: LANGUAGES
AUDIO / SUBTITLE / MENU
AUDIO:
Set the audio track language.
SUBTITLE:
Set the language of the subtitles displayed on the screen.
MENU:
Set the language used for the menus (title menu, etc.).
Setting contents:
AUTO
1
(Initial setting) / OFF
2
(SUBTITLE only) / ENGLISH /
FRENCH / JAPANESE / ITALIAN / GERMAN / SWEDISH /
SPANISH / CHINESE / OTHERS
3
1AUTO:
The disc is played with the audio language or subtitle
language set as the priority language for the disc.
2 OFF:
Subtitles are not displayed. (SUBTITLE only)
3 OTHERS:
Set this to play the disc with a language other than one of
the languages displayed. Press ENT. , then use the
numeric keypad (“0” to “9”) to input the 4-digit language
code. Then press ENT. again. For the language codes,
refer to “List of Language Codes” (page 30).
If you change the language setting when the disc is inside, the
setting is decided with one of the following operations.
-Magazine (disc) eject.
-Turn OFF the main unit.
-Switch the source on the head unit.
•To temporarily change the language of the current disc, either do
so from the DVD menu or using the operation described in the
section “Switching the Audio Tracks” (page 14).
If the disc does not include the selected language, the disc’s default
language is set.
Languages set upon shipment from the factory:
Audio language : AUTO
Subtitle language : AUTO
Menu language : AUTO
•Press RETURN to return to the previous display.
L
RETURN
;
8
:
ENT.
9
Numeric
keypad
(0 to 9)
SETUP
CLR
g
f