Filter
Top Products
21-EN
01GB05VPAB222.fm
ALPINE VPA-B222 68-02065Z86-A (EN)
Displaying the Top Menu Screen (DVD
only)
With a DVD having two or more titles, a top menu screen will appear.
Press /MENU/FUNC. on the DVD mode main screen.
The menu screen appears.
• To perform necessary operations, see “If a menu screen appears” on
page 20.
Changing Discs (only when DVD changer
is connected)
Press and hold or for at least 2 seconds.
The selected disc is played back.
• Select DISC SELECT on the FUNCTION screen and press //
ENTER to change discs, after pressing and holding /MENU/
FUNC. for at least 2 seconds.
Stopping Playback (PRE STOP)
Select the PRE STOP during playback to stop playback. That position is
stored in the memory.
1
During playback, press and hold /MENU/FUNC.
for at least 2 seconds.
The FUNCTION screen is displayed.
2
Press the joystick up or down to select STOP/PRE
STOP, then press / /ENTER.
"PRE STOP" is displayed.
3
During PRE STOP mode, press //ENTER.
Playback starts from the position at which it was stopped.
• For some discs, the position at which playback was stopped may not
be accurate.
• When a DVD player/changer is connected with Ai-NET, STOP/PRE
STOP is not displayed on the FUNCTION screen in the video CD
mode.
Stopping Playback
1
During the PRE STOP mode, press and hold /
MENU/FUNC. for at least 2 seconds.
The FUNCTION screen is displayed.
2
Press the joystick up or down to select STOP/PRE
STOP, then press / /ENTER.
“STOP” is displayed, and playback stops.
• Playback starts from the beginning when //ENTER is pressed
while playback is stopped.
• When a DVD player/changer is connected with Ai-NET, STOP/PRE
STOP is not displayed on the FUNCTION screen in the video CD
mode.
Chapter/Track/Title Repeat Playback
Use this function to play the disc’s titles, chapters or tracks repeatedly.
1
Press and hold /MENU/FUNC. for at least 2
seconds.
The FUNCTION screen is displayed.
2
Press the joystick up or down to select REPEAT,
then press / /ENTER.
The screen changes to the repeat mode in the following
step.
DVD
Video CD
• Display may vary depending on the connected devices.
• The track/disc repeat modes cannot be used on video CDs with
playback control (PBC). These modes can be carried out after
turning PBC off.
• For some discs it is not possible to switch the repeat mode.
• The repeat mode may not be switched, depending on the connected
product.
Switching the Audio Tracks
DVDs can have up to 8 different audio tracks. These alternate tracks can
be switched during playback.
1
Press and hold /MENU/FUNC. for at least 2
seconds.
The FUNCTION screen is displayed.
2
Press the joystick up or down to select AUDIO,
then press / /ENTER.
The sound switches between the alternate audio tracks
recorded on the disc.
• The alternate track selected becomes the default setting every time
the power is turned on or the disc is replaced. If the disc does not
include that track, the disc’s default language is selected instead.
• Not all discs will allow changing the alternate audio tracks during
playback. In these cases, select audio tracks from the DVDs menu.
• There may be a delay before the selected alternate track begins to
play.
The chapter is played repeatedly.
The title is played repeatedly.
The playback returns to normal mode.
The track is played repeatedly.
The disc is played repeatedly.
Playback does not repeat.
01GB00VPAB222.book Page 21 Friday, January 20, 2006 6:37 PM