Alpine VPA-B222 Car Stereo System User Manual


 
46-EN
01GB06VPAB222.fm
ALPINE VPA-B222 68-02065Z86-A (EN)
Indication for SAT Receiver Mode
The XM or SIRIUS antenna is not connected to the XM or
SIRIUS radio module.
- Check whether the XM or SIRIUS antenna cable is attached
securely to the XM or SIRIUS radio module.
Radio is being updated with latest encryption code.
- Wait until encryption code is being updated. Channels
0 and 1 should function normally.
XM or SIRIUS signal is too weak at the current location.
- Wait until the car reaches a location with a stronger signal.
Radio is acquiring audio or program information.
- Wait until the radio has received the information.
The channel currently selected has stopped broadcasting.
- Select another channel.
The user has selected a channel number that does not exist or is
not subscribed to.
- The unit will revert back to the previously selected channel.
There is no artist name/feature, song/program title, or additional
information associated with the channel at that time.
- No action needed.
Indication for iPod Mode
The iPod is not connected.
- Make sure the iPod is correctly connected.
Make sure the cable is not bent excessively.
The iPod’s battery remains low.
- Refer to the iPod’s documentation and charge the battery.
There are no songs in the iPod.
- Download songs to the iPod and connect to the VPA-B222.
Communication error
- Turn the ignition key off, and then set to ACC or ON again.
- Check the display by reconnecting between the iPod and the
adapter, using the iPod cable.
Caused by the iPod Software Version not being compatible with
this unit.
- Update the iPod Software Version to be compatible with this
unit.
(XM mode)
(SIRIUS mode)
(XM mode)
(XM mode)
(SIRIUS mode)
01GB00VPAB222.book Page 46 Friday, January 20, 2006 6:37 PM