Alpine VPA-B222 Car Stereo System User Manual


 
58-EN
01GB07VPAB222.fm
ALPINE VPA-B222 68-02065Z86-A (EN)
Connect the car system (standard audio system, etc.).
SPEAKER INPUT
Power Supply Connector
Factory System Input Terminal
Left Front (+) Speaker Input Lead (White)
Left Front (–) Speaker Input Lead (White/Red)
Right Front (+) Speaker Input Lead (Gray)
Right Front (–) Speaker Input Lead (Gray/Red)
Right Front (+) Speaker Output Lead (Gray)
Right Front (–) Speaker Output Lead (Gray/Black)
Left Front (+) Speaker Output Lead (White)
Left Front (–) Speaker Output Lead (White/Black)
Left Rear (+) Speaker Output Lead (Green)
Left Rear (–) Speaker Output Lead (Green/Black)
Right Rear (+) Speaker Output Lead (Violet)
Right Rear (–) Speaker Output Lead (Violet/Black)
(White)
SPEAKER
RIGHT FRONT
LEFT FRONT
(White/Red)
(Gray)
(Gray/Red)
RIGHT FRONT
LEFT FRONT
(Gray)
(Gray/Black)
(White)
(White/Black)
(Green)
(Green/Black)
(Violet)
(Violet/Black)
SPEAKER (RIGHT FRONT)
SPEAKER (LEFT FRONT)
SPEAKER (LEFT REAR)
SPEAKER (RIGHT REAR)
Standard Car Audio
System
SPEAKER OUTPUT
Be sure to connect the speaker input lead to the front speaker output lead. The rear speaker output lead cannot be connected.
Be sure to disconnect all the speaker output lead of the standard speaker and system.
If a multi-channel speaker system is connected, connect the speaker input to the mid range speaker (front). If a tweeter or woofer is connected,
sound will not be output correctly.
Set each item in“Using the Speaker Input” (page 14).
Refer to "Speaker Input Lead Connection" (page 51).
Failure to connect correctly may result in damage to your standard car audio system.
01GB00VPAB222.book Page 58 Friday, January 20, 2006 6:37 PM