Filter
Top Products
14
ADJUSTING THE VOLUME
Setting the volume of the
confirmation beep
The system will output a confirmation
beep for some functions if you keep a
button pressed down for longer than
approx. two seconds, for instance,
when assigning a radio station to a sta-
tion preset button. You can adjust the
volume of this beep.
➮ Press the MENU•OK button 7.
➮ Press the or button 6
repeatedly until “VOLUME MENU”
appears on the display.
➮ Press the MENU•OK button 7
to display the volume menu.
➮ Press the or button 6
repeatedly until “BEEP VOL”
appears on the display.
➮ Adjust the volume using the
buttons 6. “0” means that the
beep is deactivated, “6” means
that the maximum beep volume is
set.
When you have finished making your
changes,
➮ press the MENU•OK button 7
and then the DIS•ESC button 5
to exit the menu.
You will need a cable for this with the
following Blaupunkt number: 7 607 001
503.
You can find out from your Blaupunkt
dealer which navigation systems can
be used with your car sound system.
The volume with which telephone calls
or navigation announcements are
broadcast can be adjusted.
➮ Press the MENU•OK button 7.
➮ Press the or button 6 re-
peatedly until “VOLUME MENU”
appears on the display.
➮ Press the MENU•OK button 7
to display the volume menu.
➮ Press the or button 6
repeatedly until “TEL/NAVI”
appears on the display.
➮ Set your preferred volume level
using the buttons 6.
When you have finished making your
changes,
➮ press the MENU•OK button 7
and then the DIS•ESC button 5
to exit the menu.
Note:
You can use the volume control
3 to adjust the volume of tele-
phone calls and navigation an-
nouncements whilst you are lis-
tening to them.
01LongBeachDVD35_gb 11.07.2005, 14:38 Uhr14