Filter
Top Products
36
Changing the password
You can change the preset password
and define your own. The password
must have six digits. To change the
password, you must first enter the old
password. If you have not yet assigned
a password, use the preset password
000000.
The password is changed in the “Pass-
word” menu. To change the password,
you must first enter the current pass-
word with the numeric buttons S and
then enter the new password twice.
After you have entered the correct
password and entered the new pass-
word twice, the entry marking automat-
ically switches to “OK”.
Note:
If you forgot your password, you
can use the master code 136900
and assign a new password.
Exiting the setup menu
To exit the setup menu,
➮ press the SETUP button < on
the remote control.
Or
➮ select “Exit Setup Menu” using the
buttons 6 of the remote con-
trol or the arrow buttons on the de-
vice.
➮ Confirm your entry with the EN-
TER button > on the remote
control.
DVD OPERATION
01LongBeachDVD35_gb 11.07.2005, 14:39 Uhr36